Brother 2270DW Wireless Printer Setup Tutorial Steps

Karen Boccino
Oct 16
4 min read

Are you struggling to get your Brother HL-2270DW printer connected to Wi-Fi? Don’t worry — you’re not alone. Setting up a wireless printer can feel tricky at first, but once you know the steps, it becomes simple. Whether you want to use the printer’s control panel or take advantage of the WPS feature, this blog will guide you through each step clearly. By following the instructions below, you will have your printer ready to print from anywhere in your home/office without dealing with messy cables. Let’s get started and make printing easy.

Check Requirements Before Setup

Before you start setting up your Brother HL-2270DW Printer wirelessly, it’s important to make sure you have everything ready.

First, plug in the printer, turn it on, and make sure it shows the “Ready” status.
Power on your computer and connect it to the Wi-Fi network you want to use.
Have your Wi-Fi network name (SSID) and password ready, since you’ll need them while setting up the connection.
If you plan to use the WPS method, then you should check that your Wi-Fi router supports it.
Finally, you will need to download the latest Brother printer drivers and software for your operating system, and have a USB cable ready if you prefer the standard installation method.

Method 1: Using Control Panel

You can set up your Brother HL-2270DW printer using its control panel without needing any extra tools or apps. This method lets you connect the printer to Wi-Fi so you can start printing from your computer/phone. Before you begin, you have to make sure your router is on and the printer is plugged in and ready.

Perform the simple steps in the section below to complete the setup:

Step 1: Access the Network Settings

On the printer’s control panel, press the Menu button.
Use the arrow buttons to choose the Network option, then press the OK button.
After that, select WLAN, press OK, and then choose Setup Wizard to begin the wireless setup process.

Step 2: Connect to Your Wi-Fi Network

Now, the printer will search for available wireless networks. When you see your network name, select it and press the OK button.
Next, enter your Wi-Fi password using the arrow keys to select each character, pressing OK after each one.

Step 3: Finalize the Setup

After entering your password, the printer will try to connect to Wi-Fi.
After the printer connects, it may print a WLAN report to confirm the connection.
The last step is to install the printer driver on your computer. Use the Brother setup software or visit the Brother support website (support.brother.com) to complete the driver installation. This helps your computer recognize the printer for wireless printing.

Method 2: Using WPS

Setting up your Brother HL-2270DW printer using WPS is one of the easiest ways to get it connected to your Wi-Fi without entering a password manually. This method works best when the printer is placed close to your router for a stable signal.

Step 1: Prepare Your Devices

First of all, you have to ensure the printer is on and placed within range of your router. Then, locate the WPS button on your router — it’s on the front, back, or side and marked with the WPS symbol.

Step 2: Activate WPS on Your Router

Next, hold down the WPS button on your router for a few seconds. The WPS indicator light should start blinking, which indicates the router is ready to pair with devices.

Step 3: Initiate the WPS Connection on the Printer

On the back of your printer, locate the wireless setup button. Using a pointed object (pen), press it for less than 2 seconds. The printer will start searching for your WPS-enabled router, and the Toner LED will blink to show it’s in search mode.

Step 4: Wait for Connection to Finish

Give the printer a few moments to establish the connection. When the Ready LED turns solid green and remains on, the setup is complete, and your printer is connected to Wi-Fi, ready for wireless printing.

Frequently Asked Questions

How to Setup a Brother Printer to Print Wirelessly?

Learn how to setup your printer for wireless printing, start by going to the printer’s menu and opening the network or Wi-Fi settings. Next, you have to use the setup wizard to find your home Wi-Fi network and enter the correct password to connect. After the printer is connected, install the printer driver and software on your computer so it can communicate with the printer. Or, you can also use the Brother iPrint&Scan app on your mobile to manage printing wirelessly. Once everything is setup, you can print from any device connected to the same network.

How do I Connect my Brother 2270DW Printer to a Wi-Fi Network?

To connect your printer to Wi-Fi, you have 2 main options. The fastest way is to use WPS. First of all, press the WPS button on your router, then press the Wireless Setup button on the back of your printer using a pointed object. If you prefer a manual connection, then you can use the printer’s control panel to access the Wi-Fi Setup Wizard. From there, you have to select your network from the given list, then enter the Wi-Fi password when asked, and wait for the printer to confirm it’s connected. Both methods are easy and will get your printer online quickly.

How to Reset a Brother HL-2270DW Printer Wirelessly?

Learn how to reset your printer wirelessly, start by turning the printer on while holding the Go button. Once the printer powers up, you should release the button and press the Go button 6 times to reset the print server or 10 times to restore all settings. This process will erase the printer’s current network and other configurations, giving you a clean slate to reconnect it to your Wi-Fi network and reconfigure any other settings as needed.